Rainbow Coil Pot

Ceramics coil pots Designs


making clay flat with a rolling pin

1. Flatten piece of clay to about 1/4" thickness. Use rolling pin or a slab roller. Cut slab to desired dimensions. Ahead of time prepare clay coils by hand or with an extruder. Make sure your pre made clay coils are covered with plastic to keep them soft - coils dry out very quickly!

Make slab of clay with rolling pin
Or with a slab roller
Cut a slab base - 1/4" thick

2. Score and slip slab and lay the first layer of coil. Push the coil firmly into the slab. Cut first layer of coil as illustrated below to insure perfect fit around the parameters of the slab. Remove the unused coil pieces and blend the joint. Pinch / scrape the coil with one finger into the slab smooth using your finger, a rib or a wooden tool.
Score and slip base and apply coil
Pinch coil into slab on the inside
Merging coils using both hands
using a slab roller 3. Smooth the outside using a rib. We use Sherryll's Mud Tools red rib. Place the next layer of coil, pinch and smooth and in previous layer. When merging two layers, make sure that one hand is supporting the clay on one side while the other hand pushing / smudging the other side.
Do the same on outside
Smooth pinched coil with a rib
Place 2nd coil - no slip & scoring
Smudge coil into lower coil

4. Keep adding layers. You can add up to three at a time before blending and smoothing. When cutting a coil to fit, make the cut in a different place to insure that two joints are not directly one above the other.
Pinch outside of coil
Repeat with next layer
And with next
slip and scoring coil to slabJoin coils in a different place

5. To widen the pot, use longer coils. If taking a break cover your work and pre made coils so that the clay will remain moist and soft
Use longer coils to widen pot
Repeat the process
Inside view
Close-up view

6. Use the same method as above to create the pot's rim. You may choose to leave the rim "un-smoothed" as illustrated below. If making a large pot, it might be too soft to hold it's full weight. Cover it and allow it to set for a while before proceeding. When starting again, the next coil added MUST be slip-and-scored to the existing pot.
Coiling the rim
Pinching the rim
Close up - rim with texture
Finished pot

7. Use a paddle to both shape the pot and strengthen the coiled wall. Dry slowly by covering the pot loosely with plastic before Bisquing.
Finished coiled pots all with finger texture

8. Other samples of coiled pots made at Lakeside Pottery. See Children hanbuilding Projects
Cut coils as illustrated attaching clay coil using a silicone rib to smooth pot's walls attached second coil - no slip and scoring is required


Share this article





Related Posts


Ceramics coil pot Designs
Ceramics coil pot Designs
Creative Coil pots
Creative Coil pots
Teapot Designs
Teapot Designs

Latest Posts
Soft slab Ceramics
Soft slab Ceramics
The relationship between hands and clay…
How to make clay pots by hand?
How to make clay…
To build with love is the way the craftsman…
French Butter dish Handmade Pottery
French Butter…
James Sloss Pottery 3705 SE Locks Rd…
Handmade Coffee Mugs
Handmade Coffee…
Glaze: Industry: (We work with many different…
Ceramic slab boxes
Ceramic slab…
Personal Clay Box An Art Lesson by Marvin…
Search
Featured posts
  • Ceramics coil pot Designs
  • Creative Coil pots
  • Teapot Designs
  • Advanced Ceramics projects
  • High School Ceramics projects
  • Pinch pots artists
  • Pinch pots Design
  • Ceramics pinch pot Ideas
  • Hand thrown Ceramics
Copyright © 2017 l www.potterybyhand.com. All rights reserved.